Aluminum Alloy Material Adjustable Monopod With Buckle Design For Cameras
Specifications
Brand | BEXIN |
Model | P264/P264B |
Material | Aluminum Alloy |
Max. Load | 6.61 lbs/ 3kgs |
Max. Height | 59inch/1500mm |
Folded Length | 18.5inch/470mm |
Max. Tube | 26mm |
Min. Tube | 17mm |
Sections | 4 |
Net Weight | 0.817lbs/ 0.371kg |
Top screw | UNC3/8" - UNC1/4" |
Product Advantages
Aluminum Alloy Material
This product is made of aluminum alloy with 4 sections; It can be adjusted using a knob, and can store up to 47cm/18.50in in length and extend up to 150cm/59.06in in length.
Buckle Design
This item adopts a buckle design, which can be easily retracted and locked without falling off; It loosens when pulled outward and tightens when pulled inward.
Humanized Design
The monopod is equipped with a sponge sheath, which prevents cold in winter and sweat in summer; It comes with a portable bag, and users can choose to carry it by hand or shoulder to shoulder; It adopts an anti release rope design to prevent accidental slipping or loss.
Strong Versatility
It comes with 1/4 inch and 3/8 inch conversion screws, and can be equipped with devices such as cameras, DSLRs, micro cameras, flash phones, microphones, card cameras, LED lights, etc.
Widely Used
This multifunctional extension stick can be used as a selfie rod, a telescopic extension rod, a hiking cane, and a tripod, etc.
product features
This monopod has two options, one is the P264 model and the other is the P264B model. The main difference between the two styles of monopods is the difference in the foot pads. The foot pad of P264 is non removable, but the foot pad of P264B is removable.
-
Both models of tripods have the following features:
- Strong support aluminum alloy foot tube:the foot tube is made of aluminum alloy with a sponge jacket.
- Trigger design, effection support : easy to retract, lock and not fall off pull out ward and send it to inner panel.
- Anti-lost rope design: prevent the monopod from accidentally slipping or losing, etc.
- 1/4 and 3/8 conversion screws: the platform of the gimbal bearing platform is 1/4. Give 3/8 conversion screws for versatility.